
Shuttle PCL71. Output interface: Parallel, Serial. Product colour: Black, Blue, Country of origin: China...
The Shuttle accessory PCL71 is compatible with the Shuttle All-in-One-PC's X50V4 / X50V5. It will add two serial (COM) and one parallel (LPT) port to the back panel of the PC....

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader. Host interface: IDE, Output interface: CF. Data transfer rate (max): 0.133 Gbit/s. Width: 97 mm, Depth: 100 mm, Height: 25 mm. Package width: 48 mm, Package depth: 220 mm, Package height: 158 mm...
Connect a CF card to a computer through an IDE connectorThis Compact Flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection. Designed and constructed to provide a reliable media card platform, the CF IDE adapter is backed by StarTech.com''s 2-year warranty....

StarTech.com 2 Port ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support. Host interface: ExpressCard, Output interface: USB 3.2 Gen 1 (3.1 Gen 1). Product colour: Black. Chipset: NEC uPD720200. Width: 40 mm, Depth: 115 mm, Height: 12 mm. Package width: 173 mm, Package depth: 144 mm, Packag...
Add 2 USB 3.0 Ports to a Laptop through an ExpressCard SlotThe ECUSB3S22 2-Port ExpressCard USB 3.0 Card adds 2 SuperSpeed USB 3.0 ports to an ExpressCard-enabled computer system, using a 34mm form factor that will fit in both 34mm and 54mm slots, along with ports mounted side-by-side for easy access.Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only ...

StarTech.com IDE to SATA Hard Drive or Optical Drive Adapter - 40-Pin PATA to 2.5" SATA HDD/SSD/ODD Converter. Host interface: IDE, Output interface: SATA, Connector(s): 1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin). Product colour: Red, Certification: FCC, CE, TAA, REACH. Chipse...
Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboardThe IDE2SAT2?40-pin IDE to?SATA adapter enables you to connect a SATA I/II/III drive to an available?IDE/ATA 33/66/100/133 motherboard port -?a cost effective solution that allows you to add newer SATA drives, and?keep? your?existing motherboard.The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or?CD-ROM...

StarTech.com 40 Pin Female IDE to SATA Adapter Converter. Host interface: IDE, Output interface: SATA. Product colour: Black, Blue, Certification: CE, FCC, TAA, REACH. Chipset: Jmicron - JM20330, Data transfer rate (max): 0.133 Gbit/s. Width: 30.5 mm, Depth: 80.4 mm, Height: 11 mm. Cables included: ...
Allows connection of a SATA device to an IDE motherboard or cardThis IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive.The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space and does not impact airflow.The StarTech.com Advantage- A compact form factor to fit into almost any installation and no driver installation for true plug and play installation- Backed ...